FR Series

Refrigeration dryers are the first choice when it comes to reducing or removing moisture from compressed air. After passing through a refrigeration dryer, water in the compressed air will cool and condense. Dried air will then be discharged with the pressure dew point temperature reaching 2 to 10oC.

The Fusheng FR series refrigeration dryer provides both air-cooled models and water-cooled models. Each type can be further divided to high temperature and low temperature models based on the inlet air temperature demand from the customer end.

Uses ozone-friendly refrigerant R134a or R407C.

Uses anti-corrosive nickel-plated brass pipes for longer service life.

Uses a unique air heat exchanger with a brass pipe and fin design to prevent piping condensation.

Equipped with a computerized control panel and flow chart display for easiest operation.

Uses a flange connection for evaporators in power range from 300 hp and above to allow for easy maintenance.

General Factory

Painting

Model	Size	flow rate @ 7 kg/c㎡ (m³/min)	Refrigerant	Power consumption(50Hz) kW
FR075WP	DN80	10.7	R22	2.1
FR100WP	DN80	14.4	R22	2.8
FR150WP	DN80	21.4	R22	2.8
FR200WP	DN100	28.5	R22	4.1
FR250WP	DN100	34.2	R22	5.3
FR300WP	DN125	42.7	R22	6.1
FR400WP	DN125	59.5	R22	7.8
FR500WP	DN150	70.8	R22	8.9
FR600WP	DN150	79.3	R22	10.3
FR750WP	DN200	106.2	R22	13.5
FR1000WP	DN200	141.4	R22	16.3

Model	Size	flow rate @ 7 kg/c㎡ (m³/min)	Refrigerant	Power consumption (50Hz) kW
FR005AP	1/2"	0.83	R134a	0.5
FR010AP	1"	1.4	R134a	0.55
FR015AP	1"	1.7	R134a	0.7
FR020AP	1 1/4"	2.7	R134a	0.8
FR030AP	1 1/2"	3.7	R22	1.1
FR050AP	2"	7.2	R22	1.5
FR075AP	DN80	11.1	R22	2.1
FR100AP	DN80	15	R22	2.7
FR125AP	DN80	18.6	R22	3.5

Model	Size	flow rate @ 7 kg/c㎡ (m³/min)	Refrigerant	Power consumption(50Hz) kW
FR150AP	DN80	22.3	R22	4.2
FR175AP	DN80	26	R22	5.4
FR200AP	DN100	29.7	R22	5.5
FR250AP	DN100	35.6	R22	6.8
FR300AP	DN125	44.4	R22	8.2
FR400AP	DN125	59.5	R22	10.1
FR500AP	DN150	70.8	R22	12.1

FR Series

REFRIGERATION DRYER